CompuSTAR 1WAMR-Fiance User Manual download pdf (Page 4)

7 By Firstech, LLC By Firstech, LLC 6

Quick Reference

When servicing or loaning your vehicle to others, the NuStart system should be placed in Valet Mode. Valet Mode prevents the system from remote

starting and disables all alarm functions.

IMPORTANT: While in Valet Mode the NuStart will still lock and unlock power lock systems.

The system can be put into valet one of two ways;

1. Turn the vehicle’s key to the ignition “on” position and tap buttons (I + III) simultaneously for 0.5 second. The parking lights will flash

once and the LCD will display Z’s above the vehicle image to confirm the system is in valet mode. Repeat this process to take the system

out of valet mode. The parking lights will flash twice and Z’s will disappear to confirm the system is out of valet mode.

2. If you do not have your remote control, you can put the system into valet by turning the ignition key “on” and then “off” five times within 7

seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A

remote control is required to take the system out of valet mode.

3. If your system is set up for a secure valet option (optional), you will not be able to put the system into valet until the proper code has been entered

to the secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the

alarm and/or remote start. Until programmed, the default code is (3, 3).

v@m

Quick Reference

The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing

the battery.

Two-Way Remote: Models NU3500R

First, release the battery cover lock located on the back of the remote. Once the lock is released, gently slide the battery cover off to expose the

battery. The NU3500 requires one AAA battery.

IMPORTANT: Be sure to observe correct polarity when installing the battery.

One-Way Remotes: 1WSHR Fiance

First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care

to not damage the circuit board. The 1WSHR requires two 2025 batteries. These specialty batteries can be purchased from your local CompuStar

dealer or an electronics store.

r@mMb@r

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

CompuSTAR 1WAMR-Fiance User Manual Page 4

Comments to this Manuals

Related products and manuals for Remote controls CompuSTAR 1WAMR-Fiance