By Firstech, LLC 18 19 By Firstech, LLC
General System Functions
The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions
to be performed through a series of tapping, holding and / or multiple presses of buttons. Although NuStart remotes have numerous button functions
and capabilities, please keep in mind that the most common functions are performed in one simple step.
Sending Commands
When in range, and a command has been sent, the remote pager backlight will illuminate, the remote will beep and the appropriate icon will be
displayed. For example, to send a remote start command from the pager, hold down button (II) for 2.5 seconds. The backlight will illuminate and the
remote will beep once to confirm the command has been sent and that the remote is in range. Once the vehicle has successfully remote started, the
remote will receive a command indicating the vehicle is running.
Receiving Commands
The remote pager will receive commands indicating the status of the vehicle, confirmation of sending commands and alarm notifications. For example,
after sending the lock command, the pager will be updated with the lock icon to confirm the vehicle has been successfully locked/armed. To see if your
pager is in range to receive commands, tap button (IV) for 0.5 seconds - if the pager backlight illuminates and beeps, the pager is in range to receive
commands.
General System Functions
Tap button (I) for 0.5 seconds to lock/arm and unlock/disarm. If your vehicle is locked, tap button (I) to unlock; if your vehicle is
unlocked, tap button (I) to lock. If equipped this will also activate your starter kill and anti grind feature. You will not be able to start
your vehicle with the key until unlock/disarm.
IMPORTANT : If the alarm has been triggered (Siren is going off), you must wait until the remote pager has been paged before disarming the alarm
- the first button tap will shut off the alarm and the second will unlock/disarm the system.
a@lOa@@uOd
The system can be configured to passively lock and arm the vehicle. Put the system in passive by tapping buttons (II+III)
simultaneously for 0.5 seconds. The remote will beep once and the passive icon will illuminate to indicate the system is in passive
lock and arming mode.
While in passive mode, the system will lock and arm the alarm 30 seconds after the last door is closed. As an indicator that the vehicle is going to
passively lock and arm, the remote and siren will chirp once and the parking lights will flash once at both 10 and 20 seconds prior to passively
locking and arming. If you want the system to passively arm and not passively lock, ask your local NuStart dealer to turn Option 1-8 to setting II.
p@lOa
(36 pages)
(14 pages)
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals