MANUAL
10 IUSING WITH A FINDERAlthough StarSense replaces the need for a finder-scope, you may still wish to use a finder for quick reference, or to assist w
I 11Set up your telescope in a relatively unobstructed area that shows most of the sky. If you have obstructions like buildings or trees, StarSens
12 IAfter a successful automatic alignment, StarSense will display “Alignment Complete.”8. Press ENTER to continue. FIRST TIME SETUP: CALIBRATE CENTE
I 1310. Now, perform another StarSense Auto alignment. When alignment is complete, your telescope is ready to view objects and StarSense will accu
14 Iwhich accounts for flexure and other mechanical inaccuracies to provide the best possible pointing accuracy.SOLAR SYSTEM ALIGNSolar System Align p
I 15To save an alignment:1. When the hand control displays StarSense Ready, press ALIGN.2. Scroll UP/DOWN (also the 6 and 9 keys) to select Sav
16 ISTARSENSE CAMERAModular Jack: Connects the StarSense Camera to your telescope using the provided cable.USB Port: Available for future software de
I 176. MENU: Displays the many utilities and setup functions, such as tracking rate, user defined objects, and others.7. OPTION (Celestron Lo
18 I• Press ENTER. The telescope will slew to the object displayed on the hand control. While the telescope is slewing, you can still access many o
I 19MOTOR SPEED BUTTONThe telescope can be controlled at nine different speed rates. Pressing the MOTOR SPEED button allows you to instantly change
20 IDATABASE SETUPSkyTour Filters: Allows you to set the minimum magnitude limit (brightness) for objects that will be displayed when the SKY TOUR bu
I 21 • R.A. Limits (For equatorial mounts only): Sets the limits that the telescope can slew or track in Right Ascension (R.A.) before stopping.
22 ITo adjust, press ENTER. While viewing an object in the eyepiece, observe the responsiveness of each of the four direction buttons. Note which dir
I 23TIME AND LOCATION View / Modify Time: Allows you to view and make changes to the date, time, time zone offset, and Daylight Savings Time.View /
Copyright 2013 Celestron All rights reserved. (Products or instructions may change without notice or obligation.) Designed and intended for those 14
INTRODUCTION...5Warning...
I 5StarSense™ is patented technology that allows your telescope to determine its position and align itself with the night sky automatically. StarSe
6 ICOMPATIBLE NOT COMPATIBLENexStar SE Series NexStar i SeriesCPC, CPC DX Ultima 2000NexStar GT (with Aux. splitter) Early generation GoTo mounts (su
I 7LARGE BRACKET SMALL BRACKETAll Celestron Schmidt-Cassegrains Celestron 6” f/8.3 RefractorAll Celestron EdgeHDs NexStar 102SLT RefractorNexStar 4
8 IATTACHING THE STARSENSE CAMERA TO YOUR TELESCOPE1. Remove the fi nderscope and bracket from your telescope tube. Note: Some optical tubes, like t
I 94. Plug the included auxiliary cable into the back of the StarSense Camera on one end, and your mount’s auxiliary port on the other end. Note:
Comments to this Manuals