CompuSTAR 1WAMR-Fiance Instruction Manual download pdf (Page 23)

Zone Description Dealer installed options

1 Trunk Pin

2 Instant trigger: a heavier impact detected by the

shock sensor

3 Door switch trigger

4 Instant trigger: for optional sensors

5 Ignition trigger

6 Hood Pin

Your system stores the last two triggered zones in memory. If your system

has been triggered but the LED has been reset by turning on the igni-

tion, your dealer can still recall the last two zones that were triggered.

Contact your dealer for details.

Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag-

nostics. If you receive a Bypass notiﬁcation when arming or a Tamper

Alert notiﬁcation when disarming, look at the LED in the vehicle. Active

or triggered zones will be indicated by a pattern of blinks by the LED.

For example:

If zone 3 was active or triggered, the LED will blink three

times with a two-second pause. Then it will blink three times again, and

repeat until the ignition is turned on.

Your system stores the last two triggered zones in memory. If your system

has been triggered but the LED has been reset by turning on the igni-

tion, your dealer can still recall the last two zones that were triggered.

Contact your dealer for details.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

CompuSTAR 1WAMR-Fiance Instruction Manual Page 23