1 User Manual By Firstech LLC, Version: 1.3 Applicable to the following remote(s); P2WSSR (
10 General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configura
11 Active Lock/Arm and Unlock/Disarm Tap button (I) for 0.5 seconds to lock/arm and unlock/disarm. If your vehicle is locked, tap button (I) to u
12 Activating Reservation Mode STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and re
13 Tap button (II) for 0.5 seconds to trigger auxiliary output 1. Tap button (III) for 0.5 seconds to trigger auxiliary output 2. The remote wil
14 Adjusting the shock sensor sensitivity is done at the actual sensor, which is generally mounted somewhere under the vehicle’s dashboard. The h
15 STEP 1: Enter remote programming mode by holding down buttons (II + III) simultaneously for 2.5 seconds. The remote will beep once and the LCD
16 STEP 4: Enter the first digit of the desired four-digit pass code by knocking on the windshield in front of the RPS the desired number of times
17 Option 4: Will start at the time specified on the 2 way remote once within 24 hours every day. This option requires a cold or hot temperature
18 Turn Auto Mode off by holding down button (I) a fourth time for 2.5 seconds. The remote will beep twice and the Auto Mode icon will disappear.
19 remote has been learned. The P2WSSR can recognize two remotes; 2 two-way remotes or 1 two-way remote and 1 one-way remote. When using 2 two-w
2 Introduction ...
20 Limited Lifetime Warranty Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmans
21 Notes: ________________________________________________________________________________________________________________________________________
22 _______________________________________________________________________________________________________________________________________________
23 www.compustar.com Toll Free: 888-820-3690 21911 68th Ave S Kent, WA 98032
3 Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recomme
4 Remote Reference P2WSSR (2-Way Spread Spectrum) Applicable to the following models; - P2WSS-
5 Quick Reference Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode preve
6 2 Way Remote Button Functions Button Duration Additional Programming Required Function / Description I 0.5 seconds no Lock/Arm and Unlock/Dis
7 1 Way Remote Button Functions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no
8 Remote LCD (liquid crystal display) Diagram and Icons Your remote pager will indicate the status of your vehicle while in range. The unique LC
9 Starter Icons – Engine Running This icon will be displayed while the vehicle is running after it has been remote started. Start Availability
Comments to this Manuals